AD CR3/PMC - 64-bit 66 MHz Dual PMC Carrier Board
The AD CR3/PMC Carrier Board can be used with a range of Concurrent Technologies’ PMC host processor boards. By using a host board PMC site the carrier board allows 2 PMC modules to be added to the host processor board while still operating at 66 MHz and in 64-bit mode. This increases the flexibility and I/O capability of the host board without compromising performance. Standard PMC slave boards include SCSI, LAN, WANs, Graphics, Communications and Modems. Non-monarch processor PMCs (PrPMC) can also be used. Specialized I/O can be designed and added using the AD CR3/PMC Carrier Board. An EIDE hard disk drive and Compact Flash™ Drive are also supported.
Features
- Supports 2 single size PMC modules or 1 double size
module:
- both PMC sites support 32/64-bit and 33/66 MHz
- I/O via front panel and P0 and P2 backplane
connectors
- Up to 128 rear panel I/O lines
- both PMC sites support 32/64-bit and 33/66 MHz
- For use with selected Concurrent Technologies PMC
host processor boards
- Extends EIDE interface on selected PMC host
processor boards:
- allows simultaneous use of on-board disk drive,
Compact Flash and both PMC sites
- allows simultaneous use of on-board disk drive,
Compact Flash and both PMC sites
- Occupies one VME slot
- Extended temperature versions available:
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
- -25°C to +70°C (E-Series)
- Standard PCI bus expansion using PCI-PCI bridges,
compatible with, for example:
- Windows® XP
- Windows® 2000
- Linux®
- VxWorks®
- Windows® XP
