Specification Sheet: TP A41/30x-RC
Intel® AtomTM Processor 3U SBC
Rugged Conduction-Cooled
Rugged Conduction-Cooled
(click to view Ruggedized Air-Cooled or Commercial Air-Cooled)
Ruggedized Single Board Computer
- conduction-cooled to ANSI/VITA 30.1-2002
- conformally coated
- ruggedized air-cooled version planned:-
- see TP A41/30x-RA datasheet
- non-ruggedized version also available:-
- see TP A41/30x datasheet
Central Processor
- 1.6 GHz Intel® Atom™ processor Z530:-
- 512 Kbytes of secondary (L2) on-die cache
- 533 MHz Front Side Bus
- Intel® Hyper-Threading Technology supporting 2 execution threads
- Intel® Virtualization Technology
- uses Small Form Factor packaging (micro Flip-Chip Ball Grid Array) package
- utilizes Intel® System Controller Hub US15W
DRAM
- up to 2 Gbytes soldered DDR2-533 SDRAM
- accessible from processor or CompactPCI® bus
Mass Storage Interfaces
- 2 x SATA300 interfaces:-
- transfer rate up to 300 Mbytes/s
- accessible via J2
- 1 x EIDE interface:-
- supports an on-board CompactFlash® site (type 1)
Ethernet Interfaces
- 2 x channels supporting:-
- 10 Base-T, 100 Base-TX, 1000 Base-T
- implemented by Intel® 82546GB via PCI-X 66 bus
- both channels accessed via J2
Stereo Audio
- Intel® High Definition Audio interface via J2:-
- requires external Stereo Audio Codec
Flash EPROM
- 1 Mbyte of BIOS Flash EPROM
Graphics Interface
- implemented by the Intel® US15W SCH
- analog VGA accessed via J2:-
- resolutions up to 1920 x 1080 @ 16M colors
Serial Interfaces
- 1 x RS232 serial channel accessed via J2:-
- supporting CTS, RTS, DSR, DTR, DCD and RI
- 1 x RS232/422/485 serial channel accessed via J2:-
- supporting RTS, DTR and CTS in RS232 mode
- supporting Transmit Control in RS485 mode
- 16550 compatible UARTs
Other Peripheral Interfaces
- PC Real Time Clock (Year 2000 compliant)
- long duration timer; watchdog timer
- legacy speaker interface
- 3 x USB 2.0 interfaces accessed via J2
- 2 x GPIO signals via J2
- High Speed CANbus controller:-
- up to 1 Mbps
CompactPCI Interface
- universal signaling support, compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels
- 33/66 MHz; 32-bit interface accessed via J1
- operates as a System Slot controller (supporting up to 7 peripheral slots) or operates in a Peripheral Slot
- PICMG 2.1 R2.0 Hot Swap Compliant
- option to disable CompactPCI interface (Satellite Mode):-
- receives power from CompactPCI bus
- board can be hot swapped
IPMI
- PICMG 2.9 R1.0 (System Management Specification):-
- implements the IPMB0 interface
- on-board Baseboard Management Controller
- monitors CPU temperature, voltages and fan
- supports 8 Kbytes of non-volatile memory
Software Support
- supports Linux®, Windows® XP, Windows® XP Embedded, QNX®, and VxWorks®
Firmware Support
- Phoenix™ TrustedCore BIOS
- comprehensive Power-On Self-Test (POST)
- LAN boot firmware included
Electrical Specification
- typical current figures (1 Gbyte SDRAM)
- +5V@ 1.2A
- +3.3V@ 1.8A
- +12V@ 0.01 A
- -12V not required
- all voltages are tolerant to +5% / -3%
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperatures (VITA 47 Class CC4):-
- -40°C to +85°C
- storage temperatures (VITA 47 Class C4)
- -55°C to +105°C
- 5% to 95% Relative Humidity, non condensing (operating and storage)
- altitude (operating):
- -1,000 to 50,000 feet (-305 to 15,240 metres)
- ruggedized and commercial air-cooled versions, see separate datasheets:-
- rear plug compatible
- air-cooled: TP A41/30x-RA (planned)
- commercial: TP A41/30x (available)
Mechanical Specification
- 3U form-factor: 3.9 inches x 6.3 inches (100mm x 160mm)
- single slot
- connectors: IEC-1076-4-101 for J1-J2
- operating shock (VITA 47, conduction-cooled):
- 40g, 11ms, ½ sine
- operating random vibration (VITA 47 Class V3):-
- PSD increasing at +3dB/octave (5Hz to 100Hz)
- PSD = 0.1 g2/Hz (100Hz to 1kHz)
- PSD decreasing at -6dB/octave (1kHz to 2kHz)
(PSD = Power Spectral Density)