TP CR1/PMC-RC - 3U CompactPCI PMC Carrier Board, Rugged Conduction-Cooled
The ruggedized 3U CompactPCI® TP CR1/PMC PMC bridgeless carrier board provides a flexible solution for designers wishing to add PMC I/O functionality to a 32-bit CompactPCI system. The TP CR1/PMC-RC can accommodate one single width PMC module conforming to the IEEE 1386 Common Mezzanine Card standard. A wide range of commercial, or proprietary designed, PMC modules can be supported such as SAS, LAN, WAN, Graphics and Communications Controllers. Front panel access is supported and I/O signals from the PMC site are routed to the CompactPCI J2 connector allowing access from the rear of the system. The TP CR1/PMC-RC is rear I/O plug compatible with the commercial and the ruggedized air-cooled versions.
Features
- Ruggedized 3U CompactPCI PMC Carrier:
- conduction-cooled to ANSI/VITA 30.1-2002
- conformally coated
- -40°C to +85°C operating temperature (at card
edge)
- 3U CompactPCI® PMC Carrier supports:
- operation with 32-bit 33/66 MHz backplanes
- one single size 32-bit, 33/66 MHz PMC module
- 5 Volt or 3.3 Volt signaling
- I/O via front panel and 64 rear I/O signals via
J2
- 3.3 Volt, 5 Volt, +12 Volt and -12 Volt provided for
PMC modules via CompactPCI backplane
- Occupies one 3U CompactPCI slot
- Air-cooled versions (N, E, K-Series and RA-Series):
- N: 0°C to +55°C, commercial, non-ruggedized
- E: -25°C to +75°C, extended, non-ruggedized
- K: -40°C to +85°C, humidity-sealed, non-ruggedized
- RA: -40°C to +75°C, conformally coated, ruggedized
Request a Technical Reference Manual
View the ruggedized air-cooled variant
View the commercial air-cooled variant
| Contact Us: |
sales@gocct.com
Sales Channels |
