Specification Sheet: VP A45/01x
Intel® Atom™ Processor, Dual PMC (Plus XMC) Controller
(click to view Ruggedized Air-Cooled
or
Ruggedized Conduction-Cooled)
Central Processor
- 1.6 GHz Intel® Atom™ processor N270:-
- 512 Kbytes of secondary (L2) on-die cache
- 533 MHz Front Side Bus
- Intel Hyper-Threading Technology supporting 2 execution threads
- utilizes Mobile Intel® 945GSE Express chipset:-
- uses Intel® ICH7M I/O Hub
SDRAM
- 2 Gbytes soldered DDR2-533 SDRAM
- accessible from processor or VME bus
Mass Storage Interfaces
- 1 x EIDE interface supports on-board CompactFlash™ socket
- 2 x Serial ATA150 interfaces:-
- transfer rate up to 150 Mbytes/s
- accessed via P2 connector
- one channel switchable to on-board SATA 2.5" mass storage device
- option for USB Flash drive module
Ethernet Interfaces
- 1 x 10/100Mbps interface via front panel:-
- provided by Intel ICH7M
- 1 x 10/100/1000Mbps interface via front panel:-
- implemented by Intel® 82574 LAN Controller via x1 PCI Express® link
- 2 x 10/100/1000 Mbps interfaces via P0:-
- implemented by 2 x Intel® 82574 LAN Controllers via x1 PCI Express® links
PMC/XMC Interfaces
- 1 x PMC/XMC site and 1 x PMC site
- PMC site 1 supports:-
- 32/64-bit, 33/66 MHz PCI/PCI-X
- 3.3V or 5V signaling
- XMC interface via x1 PCI Express port
- I/O via front panel and via P2 (VITA 35 P4V2-64ac pinout)
- PMC site 2 supports:-
- 32-bit, 33MHz PCI only
- 3.3V or 5V signaling
- I/O via front panel and via optional P0
- expansion to optional dual PMC/XMC carrier board:-
- via x1 PCI Express XMC site
Serial Interfaces
- 1 x RS232 serial channel accessed via RJ45 connector on front panel:-
- supporting CTS, RTS, DSR, DTR and DCD
- 1 x RS232/422/485 serial channel accessed via P2:-
- supporting RI, CTS, RTS, DSR, DTR, DCD and RI
- 16550 compatible UART
Graphics Interface
- implemented by Intel 945GSE:-
- resolutions up to 1600 x 1200 @ 16M colors
- DVI-D graphics accessed via P2 connector
Flash EPROM
- 4 Mbytes of BIOS Flash EPROM
Software Support
- supports Linux®, Windows® XP, Windows® XP Embedded, QNX®, and VxWorks®
Firmware Support
- Phoenix™ TrustedCore BIOS
- comprehensive Power-On Self-Test (POST)
- LAN boot firmware included
Other Peripheral Interfaces
- PC-compatible Real Time Clock (Year 2000 compliant)
- 3 x USB 2.0 interfaces:-
- 1 via a USB connector on front panel
- 2 via P2 connector
- keyboard and mouse interfaces accessed via P2 connector
- watchdog timer
- 1 x 32-bit Long Duration Timer with processor interrupt capability
- 4 x GPIO signals via P2
VME Interface
- P1 and P2 connectors compatible with VME64x
- implemented using Tundra® Tsi148 device
- VME Master/Slave
- A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64
- fast hardware byte swapping
- auto system controller detect
- full interrupter/interrupt handler support
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Electrical Specification
- +5V @ 4.4 A (typical, 2Gbytes SDRAM)
- +12V @ 0.0A; -12V @ 0.0A; 3.3V not required
- +12V and -12V routed to both PMC sites
Environmental Specification
- operating temperatures:-
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
- storage temperature - VITA 47 Class C1
- operating altitude - 0 to 15,000 feet
(0 to 4,572 meters) - 5% to 95% Relative Humidity, non condensing (operating or storage):-
- K-Series includes humidity sealant
- ruggedized versions planned, see separate datasheets:-
- conduction-cooled: VP A45/01x-RC
- air-cooled: VP A45/01x-RA
Mechanical Specification
- 6U form-factor
- single slot, front panel width 0.8 inch (20.3mm)
- utilizes 160-way connectors for P1 and P2
- optional P0
- IEEE 1101.10 handles
- operating shock - VITA 47 Class OS1
- operating vibration - VITA 47 Class V1