Specification Sheet: VX 511/06x
Intel® CoreTM 2 Duo Processor
Dual PMC VITA 41.4 Controller
(click to view Ruggedized Air-Cooled, or Ruggedized Conduction-Cooled,
Central Processor
- 2.26 GHz Intel® Core® 2 Duo SP9300 or
1.86 GHz Intel Core 2 Duo SL9400 processor - common processor features:-
- dual-core CPU
- 45nm process technology
- uses μFC-BGA 956 (micro Flip-Chip Ball Grid Array) package
- 1066 MHz Front Side Bus
- 6 Mbytes of shared Level 2 on-die cache
- Intel® 64 Technology (64-bit computing)
- utilizes Intel® GS45 mobile class chipset:-
- uses Intel® ICH9M-E I/O Controller Hub
- provision for XDP debug port
DRAM
- supports up to 6 Gbytes DDR3-1066 SDRAM:-
- soldered SDRAM
- peak bandwidth of 8 Gbytes/s
- accessible from processor or VME bus
Hard Disk Interfaces
- 2 x SATA300 channels via P2 rear I/O
- option for on-board SATA300 drive (uses PMC site 2)
- EIDE interface:-
- used for on-board CompactFlash™ socket
PMC/XMC Interfaces
- 2 x PMC sites (1 includes an XMC interface)
- PMC site 1 supports:-
- 32/64-bit, 33/66/133 MHz PCI/PCI-X
- 3.3V or 5V signaling
- front panel I/O and PMC (Pn4) I/O via P2
- PMC site 1 supports an XMC interface via x8 PCI Express® port:-
- configurable as dual x4 PCI Express
- PMC site 2 supports:-
- 32-bit, 33MHz PCI only
- 3.3V or 5V signaling
- I/O via front panel only
Ethernet Interfaces
- 2 x Ethernet interfaces via front panel:-
- supporting 10 Base-T, 100 Base-T, 1000 Base-T via RJ45 connectors
- support for Intel AMT via interface 2, implemented by an Intel® 82567 Gigabit Ethernet controller
- two SERDES interfaces via VXS P0:-
- supporting VITA 41.6 Gigabit control plane interface
- 2 x 1000Mbps baseband IEEE 802.3 ports
Graphics Interface
- implemented by Intel new-generation mobile chipset
- analog VGA accessed via P2 rear I/O
- resolutions up to 2048 x 1536 @ 16M colors
Serial Interfaces
- 2 x serial channel interfaces:-
- 1 x RS232 accessed via RJ45 connector on front panel
- 1 x RS232 via P2 connector
- 16550 compatible UART
Other Peripheral Interfaces
- PC-compatible Real Time Clock
- 3 x USB 2.0 interfaces:-
- 1 via connector on front panel
- 2 via P2 connector
- keyboard and mouse interfaces via P2
- watchdog timer
- 1 x 32-bit Long Duration Timer with processor interrupt capability
BIOS EPROM
- 4 Mbyte of BIOS SPI Flash EPROM
Software Support
- support for Linux®, Windows® XP, Windows® XP (64-bit), Windows® XP Embedded, Windows® 2000, VxWorks®, QNX®, Solaris™ and LynxOS®
- Intel® Active Management Technology (AMT)
Firmware Support
- Phoenix® TrustedCore® BIOS
- comprehensive Power-On Self-Test (POST)
- LAN boot firmware included
VME/VXS Interface
- compatible with VME64x and VXS:-
- P1 and P2 connectors compatible with VME64x and VXS systems
- P0 connector compatible with VXS systems
- optional VXS P0 provides dual x4 PCI Express interface (VITA 41.4 compliant):-
- optional VXS P0 also provides dual Gigabit IEEE802.3 ports (VITA 41.6 compliant)
- VME bus interface implemented using Tundra® Tsi148 PCI-X VME64/VME320 bridge
- VME Master/Slave
- A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64, 2eSST support
- auto system controller detect
- full interrupter/interrupt handler support
Electrical Specification
- requires 5V supply only
- +5V @ 8.0A (typical at 2.26GHz with 3 GBytes DRAM);
- 3.3V, +12V and -12V supplies not utilized
- voltage +5/-3%
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperatures:-
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series, 1.86 GHz only)
- -40°C to +85°C (K-Series, 1.86 GHz only)
- storage temperature: -40°C to +85°C
- 5% to 95% Relative Humidity, non condensing (operating or storage):-
- K-Series includes humidity sealant
- ruggedized versions, see separate datasheets:-
- conduction-cooled: VX 511/06x-RC (planned)
- air-cooled: VX 511/06x-RA (available)
Mechanical Specification
- 6U form-factor
- single slot, front panel width 0.8 inch (20.3mm)
- utilizes 160-way connectors for P1 and P2
- optional VXS P0
- IEEE 1101.10 handles
- shock:-
- 20g, 11ms, ˝-sine (operating)
- 30g, 11ms, ˝-sine (non-operating)
- vibration:-
- 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating)
- 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)