Home
 News
 Products
 Sales
 Links
 About Us
 Quality
 Careers
 Search

 
Sign up here to receive our color brochure or regular newsletter
 
Copyright © 2008
Concurrent  Technologies
Trademark Legal
Privacy.

 


Specification Sheet:  AM 110/10x
- Intel® Core™ 2 Duo Processor AdvancedMC™ Module



CENTRAL PROCESSOR

  • 2.16 GHz Intel® Core™ 2 Duo processor T7400 or 1.5 GHz Intel® Core™ 2 Duo processor L7400:-

    • using a mFC-BGA 478 (micro Flip-Chip Ball Grid Array) package

    • 64 Kbytes of primary (L1) on-die cache

    • 4 Mbytes of shared secondary (L2) on-die cache

    • 667 MHz Front Side Bus (FSB)

    • Intel® 64 (or Intel® EM64T) 64-bit computing support

    • no CPU fan; low power processor

  • utilizes 64-bit Intel® 3100 server chipset:-

    • single chip chipset with integrated memory and I/O controllers

  • provision for XDP debug port

DRAM

  • supporting up to 8 Gbytes DDR2-400 ECC SDRAM:-

    • up to 8 Gbytes via two registered SODIMM sockets

    • single-bit error correction

    • gives a peak bandwidth of 3.2 Gbytes/s

  • accessible from processor and AMC connector

PICMG® AdvancedMC INTERFACES

  • hot swap compliant to AMC.0

  • x8 PCI Express® fabric connection:-

    • AMC.1 Type 8

    • transfer rate up to 4 Gbytes/s

    • supported by Enhanced DMA (E-DMA) in the Intel server chipset MCH

    • can be used as two x4 interfaces in dual redundant fabric systems

    • external or on-board fabric clock support

  • rear I/O compliant to AMC.1 specification

STORAGE INTERFACES

  • Serial ATA150:-

    • AMC.3 Type S2

    • four channel support via AMC connector

    • transfer rate up to 150 Mbytes/s

  • support for USB 2.0 Flash Disk Module

ETHERNET INTERFACES

  • dual Gigabit Ethernet interfaces via AMC connector:-

    • AMC.2 Type E2

    • supporting Serdes type 1000BX

    • implemented by Intel® 82571EB LAN Controller via x4 PCI Express port

  • 1 x front panel 10/100/1000 Mbps interface accessed via RJ45 connector:-

    • implemented by an Intel® 82541PI LAN controller via 32-bit PCI Bus

SERIAL INTERFACES

  • 2 x RS232 serial channels:-

    • 1 channel via RJ45 front panel connector

    • 1 channel via AMC connector

  • 16550 compatible UART

  • modem control signals supported:-

    • front channel supports CTS, RTS, DSR, DTR and DCD

    • rear channel supports CTS and RTS only

 

FLASH EPROM

  • 1 Mbyte of BIOS Flash EPROM - 8-bits wide

FIRMWARE SUPPORT

  • Phoenix® TrustedCore™ Server

  • comprehensive Power-On Self-Test (POST)

  • LAN boot firmware included

SOFTWARE SUPPORT

  • support for Linux®, Windows® Server 2003, Windows® XP, Windows®  XP Embedded, Windows® 2000 and QNX®

OTHER PERIPHERAL INTERFACES

  • PC-compatible Real Time Clock (Year 2000 compliant)

  • watchdog timer

  • 1 x 35-bit Long Duration Timer with processor interrupt capability

  • CPU temperature monitor; voltages monitor:-

    • all accessible via IPMI

  • 4 x USB 2.0 (Universal Serial Bus) interfaces:-

    • 1 channel via front panel

    • 2 channels via AMC connector

    • 1 channel supports USB Flash Disk Module

IPMI

  • IPMI Version 1.5 according to AMC.0

  • on-board BMC (Baseboard Management Controller)

  • supports 8 Kbytes of non-volatile memory

ELECTRICAL SPECIFICATION

  • +3.3V@0.08A; ±5%

  • +12V@3.2A; ±2V (typical at 2.16 GHz with 2 Gbytes SDRAM)

SAFETY

  • PCB (PWB) manufactured with flammability rating of 94V-0

ENVIRONMENTAL SPECIFICATION

  • operating temperature:-

    • 0°C to +55°C

  • 10% to 90% Relative Humidity, non-condensing (operating)

  • -40°C to +85°C (storage)

  • 10% to 90% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

  • AMC.0 single-width full-height form-factor: 180.6mm x 73.5mm (7.1 inches x 2.9 inches)