Mass Storage Module
- DS MS1/0xx Mass Storage Module:-
- operates with one or more of Concurrent Technologies VME or VXS single board
computers (SBCs) simultaneously
- interfaces to the SBC's SATA and USB ports
- SATA150 or SATA300 supported
- USB 1.1 and USB 2.0 supported
- various configurations available:
- one, two or three 2.5 inch SATA300 drives
- or one 2.5 inch SATA300 drive and a SATA CD/DVD RW
- supports a CompactFlash site (Type-I) in any configuration
Compatible VME/VXS SBCs
- VME or VXS Single Board Computer (SBC):-
- commercial versions
- some versions ruggedized
- VX 511/06x, Intel® Core™ 2 Duo processor
- VX 407/04x, Intel® Core™ 2 Duo processor
- VP 417/03x, Intel® Core™ 2 Duo processor
- VP 426/23x, dual Intel® Xeon® processors
- VP A45/01x, Intel® Atom processor
SATA and USB Cable Interfaces
- one or more SBC SATA/USB cable connections can be made from the SBC to the DS MS1/0xx Mass Storage Module
- 3 x SBC SATA drive interfaces:-
- 1 x SBC SATA interface connects to either a SATA drive or the SATA CD/DVD RW
- 2 x SBC SATA interfaces connect to two SATA drives
- 4 x SBC USB ports:-
- 1 x SBC USB port connects to the EIDE CompactFlash™ site
- 1 x SBC USB port connects to either a SATA drive or the SATA CD/DVD RW (N-Series only)
- 2 x SBC USB port connections available directly to the front panel from the SBC
- the CB MSS/305 cable interface kit provides:-
- SATA and USB interface cables
- rear transition module for the DS MS1/0xx
|
|
Software Support
- supported operating systems depend on the VME or VXS single board computer used
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- in harsh environments specialized solid-state Flash drives or ruggedized rotating drives are required:-
- CD/DVD RW drive is not supported
- operating temperatures:-
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
- 5% to 95% Relative Humidity, non condensing (operating or storage):-
- K-Series includes humidity sealant
- ruggedized air-cooled and conduction-cooled versions planned:-
- -40°C to +75°C (RA-Series)
- -40°C to +85°C (RC-Series)
Electrical Specification
- requires 5V supply, typical current 0.1A plus:-
- maximum 1.1A per disk @5V
- maximum 1.5A CD/DVD RW @5V
- 3.3V, +12V and -12V supplies are not required
Mechanical Specification
- 6U form-factor
- single slot, front panel width 0.8 inch (20.3mm)
- utilizes 160-way connectors for P1 and P2
- compatible with 96-way connectors
|